Zanussi ZWT71201WA Manuale Utente

(18VHUPDQXDO:DVKHU'U\HU=:7:$

ProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompartment17-18–19 Hand

Drying ProgrammesDegree of Drying Type of Fabric Drying Load Spin SpeedSuggesteddrying timein MinutesIdeal for towelling materialsCotton and linen(bat

Red wine: soak in water and detergent, rinseand treat with acetic or citric acid, then rinse.Treat any residual marks with bleach.Ink: depending on th

• To avoid a static charge when drying is com-pleted, use either a fabric softener when youare washing the laundry or a fabric condition-er specifical

to the appliance. This function remains enabledalso when the washing machine is not working.There are two different ways to set this option:1. Before

"Washing programmes" for the maximum al-lowed spin speed).Press this button repeatedly to change the spinspeed, if you want your laundry to

Cancelling a programmeTurn the selector dial to to cancel a pro-gramme which is running. Now you can select anew programme.Opening the door after th

During the last minutes of the drying cyclethe appliance performs an anti-creasephase. Through this time the door islocked. The display shows the blin

Care and cleaningWarning! You must DISCONNECT theappliance from the electricity supply,before you can carry out any cleaning ormaintenance work.Descal

When no more water comes out, unscrew thepump cover by turning it anti-clockwise andremove the filter. Use pliers, if necessary. Al-ways keep a rag ne

ContentsSafety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2Safety instructions _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3Product description _ _ _ _ _ _ _ _ _ _ _ _

• Screw the hose back to the machine andmake sure the connection is tight.• Turn on the water tap.Frost precautionIf the machine is exposed to tempera

Problem Possible cause/SolutionThe machine does not start:The door has not been closed. • Close the door firmly.The plug is not properly inserted in t

Problem Possible cause/SolutionThere is water on the floor:Too much detergent or unsuitable detergent (creates too much foam)has been used.• Reduce th

Problem Possible cause/SolutionThe machine does not dry ordoes not dry properly:The drying time has not been selected.• Select the drying time.The wat

Electrical connectionVoltage - Overall power - FuseInformation on the electrical connection is given on the rating plate, onthe inner edge of the appl

After removing all thepackaging, carefullylay machine on it'sback to remove thepolystyrene basefrom the bottom.Remove the powersupply cable and t

Caution! • This appliance must be connectedto a cold water supply.• Before connecting up the appliance tonew pipework or to pipework that hasnot been

38 mm (1.5”)standpipediamater30 cm (12”)The drain hose may be extended to a maxi-mum of 4 metres. An additional drain hoseand joining piece is availab

Building inThis appliance has been designed to be builtinto the kitchen furniture. The recess shouldhave the dimensions shown in picture A.A600596 555

• a) DoorThe dimensions of the door should be:- width 595-598 mm- thickness 16-22 mmThe height (C-Fig. C) depends on the heightof the adjacent furnitu

Obey the maximum load volume of 7 kg (refer to the “Programmechart” chapter).If the supply cord is damaged, it must be repla ced by the manu-avoid a

Graphic FFront view5 mm Hardwood stripAdditional piecesof timber should runfrom front to back40600-605100Where the appliance has been raised bymountin

Electrical connectionInformation on the electrical connection is givenon the rating plate on the inner edge of the ap-pliance door.Check that your dom

www.zanussi.com/shop 132905111-A-242015

change the fuse in the mains plug, use a 13amp ASTA (BS 1362) fuse.•This appliance complies with the E.E.C. Di-rectives.Water connection• Make sure no

Warning! Risk of injury or suffocation.• Disconnect the appliance from the mainssupply.• Cut off the mains cable and discard it.• Remove the door catc

Detergent dispenser drawer Compartment for detergent used for pre-wash and soak phase or for stain remover usedduring the stain action phase (if avail

1-8 Programme selector dial, spin speedbutton, drying level and time, andavailable optionsProgramme Selector DialIt allows you to switch the appliance

10 Display10.1 10.2The display shows the following information:10.1 Child safety lockThis device permits you to leave the appliance unattended during

Washing programmesProgrammeMaximum and Minimum TemperatureCycle DescriptionMaximum Spin SpeedMaximum Fabrics LoadType of LaundryOptionsDetergentCompar