Zanussi ZGF752IX Manuale Utente Scaricare il pdf (Pagina 19)

Fitting the Hob into the Worktop

Carry out the building in of the hob as

follows:

• put the seals supplied with the

hob, on the edges of the cut out:

place them exactly on the front

and rear edge and at 50 mm. from

the side edges, as shown in the

diagram, taking care that the

seals meet without overlapping;

• place the hob in the cut out,

taking care that it is centred;

• fix the hob with the relevant fixing

clamps and screws, as shown in

the diagram. When the screws

have been tightened, the excess

seal can be removed.

The edge of the hob forms a double seal

which prevents the ingress of liquids.

Seal

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 31 32

Nessun commento

Zanussi ZGF752IX Manuale Utente Pagina 19