Zanussi ZES3921IBA Manuale Utente Scaricare il pdf (Pagina 19)

3. Connect the brown (live) wire to the termi-

nal which is marked with the letter 'L' and is

always connected to the network phase.

There must be no cut or stray strands of wire

present. The cord clamp must be correctly at-

tached to the outer sheath.

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make

sure that the cable section is applicable to the

voltage load and the working temperature. The

yellow/green earth wire (B) must be approxi-

mately 2 cm longer than the live and neutral

wire (A).

AB

Warning! A cut off plug inserted into a 13

amp socket is a serious safety (shock)

hazard. Ensure that the cut off plug is disposed

of safely.

Important! The replacement of electric cable

must be carried out exclusively by the service

force centre or by personnel with similar

competencies, in accordance with the current

regulations.

Replacement of the connection cable

To replace the connection cable use only

H05V2V2-F T90 or equivalent type. Make sure

that the cable section is applicable to the volt-

age and the working temperature. The yellow/

green earth wire must be approximately 2 cm

longer than the brown (or black) phase wire.

Building in

40-50 mm

55 mm

30 mm

min. 650 mm

490 mm

min. 100 mm

270 mm

If several 30 cm hobs are to be installed side by

side into the same cut out, an assembly kit in-

cluding a support side bracket and supplemen-

tary seals is available at our Service Centres.

The relevant installation instructions are sup-

plied within the kit package.

R 5mm

min.

55mm

270

+1

mm

490

+1

mm

19

www.zanussi.com

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 55 56

Commenti su questo manuale

Nessun commento