Zanussi ZGG649ICN Manuale Utente

INSTRUCTION BOOKLETGAS HOBZGG 64935670-8203

10CommissioningFig. 8By-pass screwWhen the hob has been fully installed it will benecessary to check the minimum flame setting.To do this, follow the

11ServicingA: Removal Of Hob Top1. Remove the panstands and each burner capand crown.2. Lift the hob from off the working top.3. Remove the two self t

12Technical MaintenanceCheck at regular intervals the condition andserviceability of the gas connection hose andpressure regulator, if any is fitted;

2Important Safety InformationYou MUST read these warnings carefully before installing or usingthe appliance.Installation! This appliance must be insta

3For the UserDescriptionof the Appliance 4Operation 5Maintenanceand Cleaning 5Something NotWorking? 6ContentsFor the InstallerTechnical Data 6Installa

4Description of the ApplianceINSTALLATIONAny gas installation must be carried outby qualified personnel, and inaccordance with existing rules andregul

5To light a burner, turn the relevant control knobanticlockwise to maximum position and push it downto ignite. Keep the control knob pressed down fora

6OVERALL DIMENSIONSWidth: 580 mm.Depth: 510 mm.Height: 88 mm.Weight: 9,8 Kg.Instructions for the InstallerCUT OUT DIMENSIONSWidth: 550 mm.Depth: 470 m

755047058051055 min.A) End of shaft with nutB) WasherC) Adjustable jointInstallationIMPORTANTThis appliance must be installed byqualified personnel.Th

8Building InFO 1013Building over a cupboard or drawerIf the hob is to be installed above a cupboard ordrawer it will be necessary to fit a heat resist

9Before fitting the hob into the cut out, an adhesiveseal must be fitted to the underside outside edgeof the hob. It is essential that no gaps are lef